Kia 2020 Telluride - LKA Function Change

107
5
5
Driving your vehicleLane Keeping Assist (LKA) system
cle ahead covers up the lane
line.
-You drive on a steep grade or a
sharp curve.
-The vehicle vibrates heavily.
-The temperature near the
rearview mirror is very high due
to direct sun light and etc.
󳱽When front visibility is poor
-The lens or windshield is cov
-
ered by foreign materials.
-The sensor cannot detect the
lane because of fog, heavy rain
or snow.
-The windshield is fogged by
humid air in the vehicle.
-Putting something on the crash
pad and etc.
WARNING
The Lane Keeping Assist system is a
system designed to help prevent the
driver from leaving the lane. How
-
ever, the driver should not solely
rely on the system but always take
the necessary actions for safe driv
-
ing practices.
LKA function change
1.Press the MODE button () sev -
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
2.Select 'Driver Assistance → Lane
Safety' with the MOVE switch (
/ ) and the OK button on the
steering wheel.
3.Select one of the following
options:
󳱽Lane Keeping Assist: The Lane
Keeping Assist mode guides the
driver to keep the vehicle within
the lanes. It rarely provide
steering inputs when the vehi
-
cle drives well inside the lanes.
However, it starts to provide
steering inputs when the vehi
-
cle is about to deviate from the
lanes.
󳱽Lane Departure Warning: LDW
alerts the driver with a visual
and acoustic warning when the
system detects the vehicle
leaving the lane. In this mode,
the system will not provide
steering inputs. When the vehi
-
cle's front wheel contacts the
inside edge of lane line, LKA
issues the Lane Departure
Warning.
󳱽OFF: Lane Keeping Assist/Lane
Departure Warning function is
OFF.
on_en_us.book Page 107 Thursday, January 31, 2019 2:23 PM