15
3
3
Safety features of your vehicleSeat
3.Initialization will be all set after
the seat and seatback move to
the center with alarm sound being
raised.
However, the initialization process
will come to a stop and the alarm
sound will stop as well.
When pushing driving position
memory system button
When pushing driver's seat
height adjustment switch
When the driving speed exceeds
2 mph (3 km/h)
When the driver's door is closed
NOTICE
When the operation of the driver's
seat and alarm sound stop during
the initialization process, start the
process again.
Make sure that there are no
obstacles around the driver's seat
before starting initialization.
When the initialization is finished,
adjust the seat to a position com
-
fortable for the driver and save it
to the driver position memory
system.
Headrest for front seat
The driver's and front passenger's
seats are equipped with a headrest
for the occupant's safety and com
-
fort.
The headrest not only provides
comfort for the driver and front
passenger, but also helps protect
the head and neck in the event of a
rear collision.
For maximum effectiveness in case
of an accident, the headrest should
be adjusted so the middle of the
headrest is as high as the center of
gravity of an occupant's head. Gen
-
erally, the center of gravity of most
people's head is similar with the
height of the top of their eyes.
Also, adjust the headrest as close to
your head as possible. For this rea
-
son, the use of a cushion that holds
the body away from the seatback is
not recommended.
OON038108NR
on_en_us.book Page 15 Thursday, January 31, 2019 2:23 PM
To Next Page
Loading...
