113
5
5
Driving your vehicleBlind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
proper and safe driving. Always
drive safely and use caution when
changing lanes or backing up the
vehicle. The Blind-Spot Collision
Warning (BCW) system and Blind-
Spot Collision-Avoidance Assist
(BCA) system may not detect
every object alongside the vehicle.
Activating/deactivating the BCA
and BCW
1.Place the ENGINE START/STOP
button to the ON position.
2.Press the MODE button () sev
-
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
3.Select 'Driver Assistance → Blind-
spot safety' with the MOVE
switch ( / ) and the OK but
-
ton on the steering wheel.
4.Select one of the following
options:
Active assist: The BCA and BCW
turn on and get ready to be
activated. Then, if a vehicle
approaches the driver's blind
spot area a warning sounds or
braking power is applied.
Warning only: The BCW turns
on and gets ready to be acti
-
vated. Then, if a vehicle
approaches the driver's blind
spot area only a warning
sounds.
Off: The BCW/BCA is deacti
-
vated and the indicator on the
BCW/BCA button is extin
-
guished.
If you press BCW/BCA button
while 'Active assist' or 'Warning
only' is selected the indicator on
the button extinguishes and the
BCW/BCA deactivates.
If you press the BCW/BCA button
while the system is cancelled the
indicator on the button illumi
-
nates and the BCW/BCA activates.
In this case, the BCW/BCA returns
to the state before the engine
turned off. When the BCW/BCA is
initially turned on and when the
engine is turned off then on again
while the BCW/BCA is in activa
-
tion, the warning light will illumi
-
nate for 3 seconds on the outside
rearview mirror.
If the engine is turned off then on
again, the BCW/BCA maintains the
previous state.
To Next Page
Loading...
