Driving your vehicle
1145
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
Setting initial warning activation
time
1.Press the MODE button () sev
-
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
2.Select 'Driver Assistance → Warn
-
ing timing' with the MOVE switch
( / ) and the OK button on
the steering wheel.
3.Select one of the following
options:
Normal: The initial BCW is acti
-
vated normally. If this setting
feels too sensitive change the
option to 'later'.
Later: Select this warning acti
-
vation time when the traffic is
light and you are driving in a low
speed. However, if you change
the warning activation time, the
warning activation time of vehi
-
cle's other system may also
change. Check the warning acti
-
vation time before changing it.
BCW alert
When the BCW detects a vehicle in
the blind-spot, the BCW warns the
driver with a first or second stage
alert, depending on the situation.
First stage alert
If a vehicle is detected within the
boundary of the BCW, a warning
light will illuminate on the outside
rearview mirror and the Head-Up
Display (if equipped).
Once the detected vehicle is no lon
-
ger within the blind spot area, the
warning will turn off according to
the driving conditions of the vehicle.
Second stage alert
OON058045NR
OON058046NR
on_en_us.book Page 114 Thursday, January 31, 2019 2:23 PM
To Next Page
Loading...
