EasyManua.ls Logo

Kia 2020 Telluride - Detecting Sensor (Camera and Radar)

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
117
5
5
Driving your vehicleBlind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
is the responsibility of the driver
to always drive cautiously to pre
-
vent unexpected and sudden situ
-
ations from occurring. Pay
attention to the road conditions
at all times.
Detecting Sensor (Camera and
Radar)
Front camera
Rear radar
Front camera
The front camera is a sensor that
can detect lanes. If the sensor is
covered with snow, rain or foreign
substance, the BCA may temporar
-
ily be cancelled and not work prop
-
erly until the cancellation due to the
degradation of the sensor's detec
-
tion performance. Always keep the
sensor clean.
󳱽Refer to "Lane Keeping Assist
(LKA) system" on page 5-100 for
cautions for the front camera
sensor.
Rear radar
The rear radars are the sensors
inside the rear bumper for detecting
the side/rear areas. Always keep the
rear bumper clean for proper opera
-
tion of the BCW.
CAUTION
󳱽The system may not work prop
-
erly when the bumper has been
damaged, or if the rear bumper
has been replaced or repaired.
󳱽The sensing range differs some
-
what according to the width of
the road. When the road is nar
-
row, the system may detect
other vehicles in the next lane.
󳱽The system may turn off due to
strong electromagnetic waves.
󳱽Always keep the sensors clean.
OON058018NR
OON058048NR
on_en_us.book Page 117 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals