Driving your vehicle
1225
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
Driving where the road is merging/
dividing
The BCW and BCA may not operate
properly when driving where the
road is merging/dividing. In certain
instances the BCW/BCA may not
detect the vehicle in the next lane.
Always pay attention to road and
driving conditions, while driving.
Driving on a slope
The BCW and BCA may not operate
properly when driving on a slope. In
certain instances the BCW/BCA may
not detect the vehicle in the next
lane.
Also, in certain instances the BCW/
BCA may wrongly recognize the
ground or structures.
Always pay attention to road and
driving conditions, while driving.
Driving where the heights of the
lanes are different
The BCW and BCA may not operate
properly when driving where the
heights of the lanes are different.
In certain instances, the BCW/BCA
may not detect the vehicle on a road
with different lane heights (under
-
pass joining section, grade sepa
-
rated intersections, etc.).
Always pay attention to road and
driving conditions, while driving.
OON058051NR
OON058052NR
OON058053NR
on_en_us.book Page 122 Thursday, January 31, 2019 2:23 PM
To Next Page
Loading...
