EasyManua.ls Logo

Kia 2020 Telluride - Hazard Warning Flasher; Road Warning; What to Do in an Emergency

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
6
6
What to do in an emergencyRoad warning
WHAT TO DO IN AN EMER-
GENCY
Road warning
When in an emergency situation
occurs while driving or when you
park by the edge of the roadway,
you must alert approaching or pass
-
ing vehicles to be careful as they
pass. For this, you should use the
hazard warning flasher.
Hazard warning flasher
The hazard warning flasher serves
as a warning to other drivers to
exercise extreme caution when
approaching, overtaking, or passing
your vehicle.
It should be used whenever emer
-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ENGINE START/STOP button in any
position. The flasher switch is
located in the center fascia panel. All
turn signal lights will flash simulta
-
neously.
󳱽The hazard warning flasher oper
-
ates whether your vehicle is run
-
ning or not.
󳱽The turn signals do not work
when the hazard flasher is on.
󳱽Care must be taken when using
the hazard warning flasher while
the vehicle is being towed.
OON068001NR
on_en_us.book Page 3 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals