Kia 2020 Telluride - Tire Maintenance; Tire Traction; Wheel Replacement

Maintenance
367
Tires and wheels
cause the ABS and Electronic Stabil -
ity Control (ESC) to work irregularly.
It is best to replace all four tires at
the same time. If that is not possi
-
ble, or necessary, then replace the
two front or two rear tires as a pair.
Replacing just one tire can seriously
affect your vehicle's handling.
NOTICE
We recommend that when replac -
ing tires, use the same originally
supplied with the vehicles. If not,
that affects driving performance.
Wheel replacement
When replacing the metal wheels
for any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.
A wheel with an incorrect size may
adversely affect many things: wheel
and bearing life, braking and stop
-
ping abilities, handling characteris -
tics, ground clearance, body-to-tire
clearance, snow chain clearance,
speedometer and odometer calibra
-
tion, headlight aiming and bumper
height.
CAUTION
Wheels
Wheels that do not meet Kia specifi
-
cations may fit poorly and result in
damage to the vehicle or unusual
handling and poor vehicle control.
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces.
Tires should be replaced when tread
wear indicators appear. Slow down
whenever there is rain, snow or ice
on the road to reduce the possibility
of losing control of the vehicle.
Tire maintenance
In addition to proper inflation, cor -
rect wheel alignment helps to
decrease tire wear.
If you find a tire is worn unevenly,
have your dealer check the wheel
alignment.
When you have new tires installed,
make sure they are balanced. This
will increase vehicle ride comfort
and tire life. Additionally, a tire
should always be rebalanced if it is
removed from the wheel.
on_en_us.book Page 36 Thursday, January 31, 2019 2:23 PM