Maintenance
667
Light bulbs
Replacing High Mounted Stop Lamp
(LED type) bulb
If the High Mounted Stop Lamp
(LED) (1), does not operate, have
the vehicle checked by an autho
-
rized Kia dealer.
The LED lamps cannot be replaced
as a single component because it is
an integrated unit. The LED lamps
have to be replaced with the unit.
A skilled technician should check or
repair the High Mounted Stop Lamp
(LED), for it may damage related
parts of the vehicle.
Replacing license plate lamp bulb
1.Using a flat-blade screwdriver,
gently pry the lamp assembly
from interior.
2.Remove the bulb by pulling it
straight out.
3.Install a new bulb in the socket.
4.Install the lamp assembly to inte
-
rior.
Replacing map lamp (bulb type)
bulb
1.Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2.Remove the bulb by pulling it
straight out.
3.Install a new bulb in the socket.
4.Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
NOTICE
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
OON078046NR
To Next Page
Loading...
