4103
Features of your vehicle
CAUTION
The system may not operate nor-
mally in the below conditions.
• When the light from the on-com-
ing or front vehicle is not detect-
ed because of lamp damage,
hidden from sight, etc.
• When the lamp of the on-com-
ing or front vehicle is covered
with dust, snow or water.
• When the light from the on-com-
ing or front vehicle is not detect-
ed because of exhaust fume,
smoke, fog, snow, etc.
• When the front window is cov-
ered with foreign matters such
as ice, dust, fog, or is damaged.
• When there is a similar shape
lamp with the front vehicle’s
lamps.
• When it is hard to see because
of fog, heavy rain or snow.
• When the headlamp is not
repaired or replaced at an
authorized dealer.
(Continued)
(Continued)
• When headlamp aiming is not
properly adjusted.
• When driving on a narrow
curved road or rough road.
• When driving downhill or uphill.
• When only part of the vehicle in
front is visible on a crossroad or
curved road.
• When there is a traffic light,
reflecting sign, flashing sign or
mirror.
• When the road conditions are
bad such as being wet or cov-
ered with snow.
• When the front vehicle’s head-
lamps are off but the fog lamps
on.
• When a vehicle suddenly
appears from a curve.
• When the vehicle is tilted from a
flat tire or being towed.
• When the LDWS (lane departure
warning system) warning light
illuminates. (if equipped)
WARNING
• Do not place any accessories,
stickers or tint the windshield.
• Have the windshield glass
replaced from an authorized
dealer.
• Do not remove or impact relat-
ed parts of the High Beam
Assist system.
• Be careful that water doesn’t
get into the High Beam Assist
unit.
• Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc. The system may malfunc-
tion if sunlight is reflected.
• At times, the Smart High
Beam system may not work
properly, always check the
road conditions for your safe-
ty. When the system does not
operate normally, manually
change between the high
beam and low beam.