Features of your vehicle
1064
Headlight leveling device
(if equipped)
Manual type
To adjust the headlight beam level
according to the number of passen-
gers and loading weight in the luggage
area, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight
beam level. Always keep the head-
light beam at the proper leveling
position, or headlights may dazzle
other road users.
Listed below are the examples of
proper switch settings. For loading
conditions other than those listed
below, adjust the switch position so
that the beam level may be the near-
est as the condition obtained accord-
ing to the list.
Automatic type
It automatically adjusts the headlight
beam level according to the number
of passengers and loading weight in
the luggage area.
And it offers proper headlight beam
under various conditions.
OHM048223N
Loading condition
Switch
position
Driver only 0
Driver + Front passenger 0
Driver + Front passenger+
3rd row passenger
1
Full passengers
(Including driver)
1
Full passengers (including driv-
er) + Maximum permissible load-
ing
2
Driver + Maximum permissible
loading
3
WARNING
If it does not work properly even
though your car is inclined
backward according to passen-
ger's posture, or the headlight
beam is irradiated to the high or
low position, we recommend
that the system be inspected by
an authorized Kia dealer.
Do not attempt to inspect or
replace the wiring yourself.
To Next Page
Loading...
