Safety features of your vehicle
143
To reinstall the headrest:
1. Put the headrest poles (2) into the
holes while pressing the release
button (1).
2. Recline the seatback(4) with the
recline lever or switch (3).
3. Adjust the headrest to the appro-
priate height.
WARNING
NEVER allow anyone to ride in a
seat with the headrest removed.
OHM033203
OHM033201
■ Type B
■ Type A
WARNING
Always make sure the headrest
locks into position after rein-
stalling and adjusting it properly.
To Next Page
Loading...
