97
Specifications & Consumer information
*
1
Refer to the recommended SAE viscosity numbers on the next page.
*
2
Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*
3
If the API service SM or ACEA A5 engine oil is not available in your country, you are able to use API service SL or ACEA A3.
*
4
DPF : Diesel Particulate Filter
Lubricant Volume Classification
Brake fluid
0.7~0.8 l (0.7~0.8 US qt.)
FMVSS116 DOT-3 or DOT-4
Differential oil
Front
1.3~1.4 l (1.4~1.5 US qt.)
HYPOID GEAR OIL
SAE 90, API GL-5
Rear
1.7~1.9 l (1.9~2.0 US qt.)
Transfer case oil (4WD)
Part-time
1.5~1.7 l (1.6~1.8 US qt.)
ATF DEXRON III or equivalent
Full-time ATF MOBILFLUID LT or equivalent
Fuel
80 l (21.13 US gal.)
Refer to "Fuel requirements" in chapter 1
To Next Page
Loading...
