Trip Computer*
Trip Computer* displays come in two types, as shown in the illustration
at the bottom left. The Reset and Trip buttons are located to the right of
the steering wheel.
Reset Button: Press
H
for more than 1 second to clear any previous Trip
A/Trip B mileage, drive time, average fuel consumption, average speed, and
average fuel economy.
Trip Display Monitor Button:
i
Displays compass and mode information.
Trip A: Tripmeter A.
Trip B: Tripmeter B.
(RANGE) Distance to Empty: Displays estimated distance to empty based on
the remaining fuel in the tank and the amount of fuel delivered to the engine.
When the remaining distance is below 50 miles, “---” will be displayed and the
Distance to Empty indicator will blink.
(AVG) Average Speed: Calculates the average speed of the vehicle since the
last average speed reset.
(E/T) Elapsed Driving Time: Displays total driving time since the last reset.
(AVG) Average Fuel Consumption: Displays the average fuel consumption
from the total fuel used and the distance since the last average fuel
consumption reset.
Instant MPG: calculates the instant miles per gallon (MPG) during the last few
seconds.
H
type a*
type B*
i
steering Wheel / stalK / Panel controls