Kia Borrego - Drivers Controls Exterior; Key Fob and Keyless Entry; Fuel Cap and Check Engine Light

Kia Delivery First
–
the Priority that Delivers More
27
Always check the Owner’s Manual for complete operating information and safety warnings.
* If equipped.
seating
Front Seat Position Memory Buttons*
Located on the driver’s side door panel. Two different driver’s seat, outside
mirror and tilt/telescoping steering wheel* settings can be stored in memory.
SET
2
With the key “ON,” store a position in memory:
1. Make sure the vehicle is in the PARK position.
2. Adjust driver’s seat and outside mirrors to the desired position.
3. Press and release the memory set button (SET), then press and hold one of the memory recall buttons “1” or “2” within 5 seconds.
“1” or “2” Memory Recall*: Press buttons “1” or “2” to recall stored memory seat mirror and pedal positions.
Easy Access Function*: With the key “ON”, and the vehicle in the PARK position, press and hold the set button (SET)
for more than 10 seconds to enable or disable the Easy Access* function.
Fold and Unfold 2nd Row Seats
To Fold the 2nd Row Seat, Do the Following:
1. Lower headrest to the lowest position.
2. Move the seat to the rear-most position.
3. Pull up on the seatback recline lever
H
.
4. Fold the seat toward the front of the vehicle.
H
i
PULL
PUSH FORWARD
H
PULL
BACKWARD
Unfold the Rear Seat:
1. Pull up on the seatback recline lever
H
.
2. Push seatback to the upright and locked position. Make
sure the seatback is locked rmly in place.
To Access the 3rd Row Seats:
1. Enter from the passenger side rear door.
2. Lift the handle
i
and move the seat down and forward.