Features of your vehicle
1224
Digital clock
Whenever the battery terminals or relat-
ed fuses are disconnected, you must
reset the time.
When the ignition switch is in the ACC or
ON position, the clock buttons operate as
follows:
■
Type A
Hour (1)
Pressing the H button will advance the
time displayed by one hour. If the R but-
ton is pressed while adjusting, the hour
will reset.
Minute (2)
Pressing the M button will advance the
time displayed by one minute. If the R
button is pressed while adjusting, the
minute will reset as follows.
9:00 ~ 9:29 ➔ 9:00
9:30 ~ 9:59 ➔ 10:00
Reset (3)
• 12 hour format : Pressing the R button
will reset the time to 12:00 AM.
• 24 hour format : Pressing the R button
will reset the time to 0:00.
Display conversion
To change the 12 hour format to the 24
hour format follow the direction below.
1. Turn the audio system on.
2. Press the setup button and select the
CLOCK menu by using the File/Tune
button.
3. Press the OK button.
4. Select the Time Format you desire
using the File/Tune button.
5. Press the OK button.
WARNING
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause an accident that
results in severe personal injury or
death.
■ Type A
OVG041160
OVG041161
■ Type B
To Next Page
Loading...
