17
(Button on right of steering wheel)
Lane Following Assist (LFA)
†6
The Lane Following Assist (LFA) system monitors lane lines and adjusts
the steering to help position the vehicle in the center of the lane.
To enable or disable the LFA system, go to Vehicle Settings on the audio
head unit. Press Settings, Vehicle > Driver Assistance > Driving Assist
> Lane Following Assist.
To activate or deactivate the LFA system press the LFA button
A
on the
Steering Wheel.
When the LFA system is activated and detects lane markers and/or a
preceding vehicle, the LFA indicator will illuminate green if the
steering assist mode is on, or white if the steering assist mode is off.
The LFA system will operate only when these conditions are met:
• When the Smart Cruise Control is on and operating
• The vehicle is traveling slower than 95 mph
A
CRUISE
Images are for illustrative purposes only and may not reflect actual
feature or operation.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
REMINDERS:
• If the ignition is cycled, the LFA returns to its previous state, on or off
• The LFA system recognizes the lane the vehicle is traveling in
• The LFA system is not a substitute for safe and proper driving. Always drive safely and
use caution
See the Owner’s Manual for more detailed information, limitations and conditions.
A
DRIVER'S PANEL