EasyManua.ls Logo

Kia CADENZA 2020 - Seat Belts

Kia CADENZA 2020
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS *IF EQUIPPED
33
Displays the front wide view and top view
(default)
Displays the top view and zoomed-in
front top view
Displays the front blind spot view and
top view
Used to adjust the brightness and
contrast of the camera images.
Displays the surround view settings
Front SVM - when in Drive & Neutral: Rear SVM - when in Reverse:
Displays the rear wide view and top view
(default)
Displays the top view and the zoomed in
top view
Displays the rear blind spot view and top
view
Used to adjust the brightness and
contrast of the camera images.
Displays the surround view settings
The Front SVM camera will turn off when the gear shift is
moved into Park or Reverse or the SVM button is pressed.
QUICK TIP
Surround View
Monitoring (SVM) Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to page 2 for more
information.
QR CODE
www.youtube.com/KiaFeatureVideos
Surround View Monitoring (SVM) System*
The Surround View Monitoring (SVM) System is a parking support system that shows the areas around the front, rear, left,
and right sides of the vehicle via four cameras displayed onto the audio head unit screen. The SVM system will turn on when
the SVM button
A
is pressed, the gear shift is in N (Neutral) or D (Drive) and the LED is illuminated.
The Front SVM camera is ON when the
Engine Start/Stop button is On, the gear shift
is in Drive or Neutral and the SVM button is
pressed ON
Rear SVM: The rear camera view will
automatically display on the navigation screen
when the vehicle is shifted into Reverse. The
rear camera view will turn off when the vehicle
is shifted out of Reverse
Front SVM: The camera view will display on the navigation
screen in both Drive and Neutral. In Drive, the camera
view will continue to display until the vehicle is above
approximately 9 mph.
Camera View Modes – To change camera view modes, press the icons shown below on the navigation screen to select the mode.
REMINDER: The SVM camera is
equipped with an optical lens to
provide a wider range of vision and
may appear different from the
actual distance.
The Surround View Monitor system
is only a supplemental system and
may not display all objects around
the vehicle. Drivers should not rely
solely on the SVM information when
parking and backing up. Drivers
should always pay attention and
directly check the the left/right
and rear.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
DRIVE
MODE
R
N
D
P
AUTO
HOLD
VIEW
(Button located below gear shift)
A
CENTER PANEL

Table of Contents

Other manuals for Kia CADENZA 2020

Related product manuals