CADENZA FEATURES & FUNCTIONS GUIDE
50
*IF EQUIPPED
(Lever located near floor below
Driver’s Panel)
A
Hood Release Lever and Latch
Opening the Hood:
1. Pull the Hood Release Lever
A
to unlatch the Hood
2. In the front of the vehicle, lift the Hood slightly, push the secondary Latch
B
to the left inside of the Hood’s center and lift the Hood
Closing the Hood:
Lower the Hood about halfway and then press down to securely lock in place.
REMINDERS:
• While lowering and closing, keep hands away from under the Hood
• Open the Hood only after turning the engine off, on a flat surface, with the gear shift in P (Park) position and setting the parking brake
• Make sure the hood is securely closed before driving
B
OTHER KEY FEATURES
To Next Page
Loading...
