Kia e-niro - Ignition Fuse Disabling Method

16
Emergency Procedures
1. Open the hood.
II. Disabling the System – IG (Ignition) Fuse Removal
2. Remove the motor room fuse box
cover.
3. If necessary, lower the windows,
unlock the doors and open the tail gate
as required, before disconnecting the
12V battery (located in the right side of
motor room). Once the 12V battery is
disconnected, power controls will not
operate.
4. In the event the vehicle is unable
to be disabled using the “Power”
START/STOP Button, using the fuse
puller located
in the Motor room fuse
box, pull both the IG1, IG2 Fuse
from the motor room fuse box.
If the
IG fuses cannot be located, pull out
all the fuses and relays in the fuse
box.
Motor room fuse box