Kia EV6 2022 - Instrument Cluster; Drive Mode Integrated Control System

3.
Disable Direct Hazards / Safety Regulations
1. Open
the hood.
3.2 Disabling the System
– IG (Ignition) Fuse Removal
2. Remove the PE(Motor) room fuse box
cover.
3. If necessary, lower the windows,
unlock the doors and open the tailgate
as required, before disconnecting the
12V battery (located in the left side of
PE(Motor) room). Once the 12V battery
is disconnected, power controls will not
operate.
4. In the event the vehicle is unable
to be disabled using the “Power”
START/STOP Button, using the fuse
puller located in the PE(Motor) room
fuse box, pull both the IG1, IG2 fuse
from the PE(Motor) room fuse box. If
the IG fuses cannot be located, pull
out all of the fuses and relays in the
fuse box.
PE(Engine) room fuse box
11