Kia EV6 2022 - Advanced Driver Assistance Systems (ADAS); Blind-Spot View Monitor (BVM); Safe Exit Assist (SEA)

23
†LEGAL DISCLAIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Blind-Spot View Monitor (BVM)*
†4
Blind-Spot View Monitor is designed to display the rear and side of
the vehicle blind spot areas in the Instrument Cluster LCD
A
when
the system is activated.
To turn BVM on press the SETUP key/button on the Infotainment
System. Select VEHICLE, then Driver Assistance, then Blind-Spot
Safety, and then Blind-Spot View.
When operating the turn signal
B
, BVM displays video of the
blind-spot view for the direction indicated.
BVM will not operate when the Power button is off, a turn signal
is deactivated or another warning screen comes up on the
Instrument Cluster LCD.
When engaged, these systems
are not substitutes for safe
driving and may not always
warn the driver if the vehicle is
driven outside of its lane. Always
drive safely and use caution.
Images are for illustrative
purposes only and may not
re󲛶ect actual feature or
operation. See section 4 in
the Owner’s Manual for more
information.
Images are for illustrative
purposes only and may
not re󲛶ect actual feature
or operation. See section 6
in the Owner’s Manual for
more information.
(LCD display showing right side of vehicle)
Safe Exit Assist (SEA)*
†4
Safe Exit Assist can help prevent passengers from
opening their door by displaying a warning message
on the Instrument Cluster and sounding an audible
warning when a vehicle is detected
C
, approaching
from behind, after your vehicle has stopped.
SEA keeps the doors closed. When opening a door,
SEA warns the driver of the risk of collision with a
vehicle approaching the blind spot area.
In addition, when the Electronic Child Safety Lock
button is in the LOCK position and an approaching
vehicle from the rear area is detected, the Electronic
Child Safety Lock button will not unlock the rear
doors, even if the driver presses the button to open
the doors.
To turn on SEA, press the SETUP key/button on
the Infotainment System. Select VEHICLE, then
select Driver Assistance, Blind-Spot Safety, and
Safe Exit Assist.
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Blind-Spot View Monitor
(BVM) Video
Safe Exit Assist (SEA)
Video
0mph
P
0 KMH
Attention Level
0 20 40 60
202 m
１00
kWh/１00m
268m
96%
Lv１
READY 66°F
High
Last Break
0:00
A
B
ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
OFF
AUTO
AUTO
OFF
AUTO
AUTO
C