Kia EV6 2024 - Driver Position Memory System; 僅 Recalling Memory Positions; 僅 Resetting Memory Positions; 僅 Storing Memory Positions

23
5
5
Features of your vehicle Driver Position Memory System
Driver Position Memory Sys -
tem (if equipped)
The Driver Position Memory System is
provided to store and recall the following
memory settings with a simple button
operation.
僅 Driver's seat position
僅 Outside rear view mirror position
僅 Instrument panel illumination intensity
僅 Head Up Display (HUD) display mode,
position, AR matching adjustment (if
equipped)
WARNING
Never attempt to operate the driver
position memory system while the vehi -
cle is moving.
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
NOTICE
僅 If the battery is disconnected, the
memory settings will be erased.
僅 If the Driver Position Memory System
does not operate normally, have the
system checked by an authorized Kia
dealer.
Storing memory positions
1. Shift to P (Park) while the EV button is
in the ON position.
2. Adjust the driver's seat position, out
-
side rearview mirror position, and
head-up display height to the desired
position.
3. Hold the button (1 or 2). The system
will beep once and notify you ‘Driver 1
(or 2) settings saved' will appear on
the infotainment screen.
Recalling memory positions
1. Shift to P (Park) while the EV button is
in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver's seat position, outside
rearview mirror position, and head-up
display height will automatically
adjust to the stored positions.
3. ‘Driver 1 (or 2) settings applied' will
appear on the infotainment screen.
NOTICE
僅 In order to adjust the memory button
(2) while adjusting the memory button
(1), press the memory button (1) to
pause the adjustment of (1), then
press memory button (2).
僅 If you adjust the seat, rearview mirror,
head-up display while recalling the
stored positions, the manually
adjusted settings will be applied.
Resetting memory positions
If the Driver position memory system
does not work properly, initialize the sys -
tem as follows:
Resetting integrated memory
system
1. Stop the vehicle and open the driver's
door with the EV button in the ON
position and the vehicle shifted to P
(Park).
2. Adjust the driver's seat and seatback
to the foremost position.
OCV041013L
OwnersManuals2.com