Features of your vehicle
585
Mirrors
The mirror will fold or unfold automati
-
cally as follows:
僅 The mirror will fold or unfold when the
door is locked or unlocked by the
smart key.
僅 The mirror will fold or unfold when the
door is locked or unlocked by the but
-
ton on the outside door handle.
僅 The mirror will unfold when you
approach the vehicle (all doors closed
and locked) with a smart key in pos
-
session. (if equipped)
The electric type outside rear view mir
-
ror operates even though the EV button
is in OFF position. However, to prevent
unnecessary battery discharge, do not
adjust the mirrors longer than necessary
while the EV button is ON.
Do not fold an electric type outside rear
view mirror by hand as this could cause
motor failure.
Reverse parking aid function (if
equipped)
When the gear is shifted to the R
(Reverse) position, the outside rear view
lever(s) will rotate downwards to aid with
driving in reverse.
The position of the outside rear view
mirror switch (1) determines whether or
not the mirrors will move:
僅 Left/Right: When either the L (Left) or
R (Right) switch is selected, both out
-
side rear view mirrors will move.
僅 Neutral: When neither switch is
selected, the outside rear view mirrors
will not move.
The outside rear view mirrors will auto
-
matically revert to their original positions
if any of the followings occur:
僅 The EV button is placed to either the
OFF position or the ACC position.
僅 The gear is shifted to any position
except R (Reverse).
僅 The remote control outside rear view
mirror switch is not selected.
Reverse parking aid user settings
mode
If you cannot secure enough visibility
with the angles provided as factory
default conditions, you can readjust and
store the angles of outside rear view mir
-
rors.
The factory default angles of the right
and left rear view mirrors might be set
differently to improve visibility.
1. Set the shift lever to P (Parking). Make
sure that the vehicle is stopped and
the mirrors are not working.
2. Position the lever to L (left) or R (right)
depending on the mirror that you
want to adjust.
3. Step on the brake pedal and shift the
shift lever to R (Reverse).
4. When the downward movement of
the rear view mirror is finished, adjust
the mirror to the desired angle by
pressing the switches, ▼, ▲, ◀, ▶.
5. If you shift the shift lever to a position
other than R (Reverse), or change the
To Next Page
Loading...
