Features of your vehicle
1005
Automatic climate control system
Heating and air conditioning manually
The heating and cooling system can be controlled manually by pressing buttons or
turning knob(s) other than the AUTO button.
In this case, the system works sequentially according to the order of buttons or
knob(s) selected.
1. Start the vehicle.
2. Set the mode to the desired position.
For improving the effectiveness of heating and cooling;
僅Heating:
僅 Cooling:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
If air conditioning is desired, turn the air conditioning system on.
Press the AUTO button in order to convert to full automatic control of the system.
To Next Page
Loading...
