31
1
1
Electric vehicle guide Charging electric vehicle
Please make sure that charge level
selection matches the capacity of your
circuit breaker to avoid blowing a fuse.
(Examples are only for reference and sit
-
uations may vary depending on the sur
-
rounding environment.)
How to connect portable charger
(ICCB: In-Cable Control Box) (sold
separately)
1. Connect the plug to a household elec
-
tric outlet.
僅 If the outlet is aged, damaged or
cracked, do not use it.
僅 Do NOT use an extension cord
between the household electric outlet
and L1-trickle charger, as household
power source should be a dedicated
120VAC/15AMP/properly grounded
outlet.
2. Check if the power lamp (green) on
the control box turns ON.
3. While the brake pedal is pressed,
engage the parking brake.
4. Place the gear in P (Park). If you try to
charge while the gear is not placed in
P (Park), it will automatically move to
P (Park).
However, charge the battery only
when the gear is placed in P for safety
reasons.
* Make sure that the plug is not
loosely put into the outlet. (If it is
loose, it may generate heat.)
5. Press the charging door to open. You
cannot open the charging door when
the vehicle's doors are locked.
If you cannot open the charging door
due to freezing weather, tap lightly or
remove any ice near the charging door.
Do not try to forcibly open the charging
door.
In order to connect the charging connec
-
tor, unlock the vehicle's doors to unlatch
the charging connector lock system.
If not, the charging connector and the
vehicle's charging inlet may be dam
-
aged.
6. Open the charging door and then
open the inlet cover.
7. Open the protective cover of the
charging connector and check if there
To Next Page
Loading...
