Driver assistance system
967
Rear View Monitor (RVM)
With the vehicle on, select the setup icon
( ) on the screen or
Setup
→
Vehicle
→
Driver Assistance
→
Parking Safety
→
Camera Settings
from the infotainment
system screen to change the Rear View
Monitor settings.
僅 Display Contents: To change the set
-
tings of
Extended Rear View Moni
-
tor
and
Rear Parking Guide Lines
.
僅 Display Settings: To change the
screen's brightness and contrast.
Rear View Monitor operation
Parking/View button
Press the Parking/View button (1) to turn
on or off Rear View Monitor while P
(Park) position is selected.
Rear view
Operating conditions
Rear View Monitor will turn on when the
following conditions are satisfied:
僅 Shifting the gear to R (Reverse).
僅 Pressing the Parking/View button (1)
while P (Park) gear position is selected
僅 Pressing the View icon with the Rear
top view on the screen
Off conditions
Rear View Monitor will turn off when the
following conditions are satisfied:
僅 Pressing the Parking/View button (1)
again while P (Park) gear position is
selected. with the rear view on the
screen.
僅Changing the gear from R (Reverse)
to P (Park).
The rear view cannot be turned off when
the gear is in R (Reverse).
Extended Rear View Monitor
Extended Rear View Monitor function
maintains the rear view of the vehicle
when shifting the gear from R (Reverse)
to N (Neutral) or D (Drive) to help you
park safely.
Operating conditions
Rear View Monitor will maintain when
the following conditions are satisfied:
僅 Shifting the gear from R (Reverse) to
N (Neutral) or D (Drive).
僅 The vehicle speed is below approxi
-
mately 6 mph (10 km/h).
Off conditions
Extended Rear View Monitor function
will turn off when one the following con
-
ditions are satisfied:
僅 The vehicle speed is above approxi
-
mately 6 mph (10 km/h).
僅 Pressing the Parking/View button (1).
僅Shifting the gear to P (Park).
To Next Page
Loading...
