Electric vehicle guide
101
EV menu
Target temperature Settings
If the target temperature is set with the
cable connected, the cabin temperature
will be adjusted to the target tempera
-
ture at departure time. In cold weather,
pre-scheduled heating helps enhance
electric vehicle performance by heating
the vehicle in advance.
Vehicle to load (V2L)
V2L is the system that provides AC
power using the high voltage battery for
driving to operate several electronical
products.
Select the icon on the screen.
1 Electricty Use Settings (V2L)
2 Min.%
If the vehicle reaches to the limit, it auto
-
matically cut supply of electricity.
1 Charging status
2 Distance to Empty
3 Min.%
4 Time Remaning
Check various information about the
V2L in the infotainment system when
using the V2L.
How to connect V2L
V2L connector (if equipped)
1. Open the cover of the V2L connector.
2. Close the cover after connecting elec
-
tronic appliances to the power outlet.
3. Connect the V2L connector to the
charging hole on the vehicle.
4. Press the switch (A) of the V2L con
-
nector and check whether the light (B)
is on or off. The light (B) may not turn
on normally when:
僅 See the battery discharging limit for
high voltage battery for driving in
Energy consumption
menu on the
To Next Page
Loading...
