Features of your vehicle
505
Hood
Hood
The hood serves as a cover for the
motor compartment and access to the
front trunk.
Opening the hood
Instrument panel button (1)
1. Press the hood unlock button (1)
located on the instrument panel twice.
After pressing the button once, you
must press it again within 3 seconds
to unlock the hood.
After 3 seconds, the pressing count is
reset, so you have to press the hood
to lock it and repeat the previous pro
-
cess.
2. Lift the unlocked hood upwards.
3. Lift the hood halfway and it will fully
open by itself.
4. After lowering the hood, push it all the
way down and close it.
Smart key button (2)
1. Press and hold the hood unlock but
-
ton (2) on the smart key for approxi
-
mately 1.5 seconds to unlock the
hood.
2. Lift the unlocked hood upwards.
3. After lowering the hood, push it all the
way down and close it.
Closing the hood
1. Before closing the hood, check the
following:
僅 All filler caps in the motor compart
-
ment must be correctly installed.
僅 Gloves, rags or any other combusti
-
ble material must be removed from
the motor compartment.
2. Lower the hood until it is about 30 cm
(12 inches) above the closed position
and let it drop. Make sure that it locks
into place.
3. Check that the hood has fully closed
by firmly pressing on the front edge
of the hood.
僅 If the hood can be raised slightly, it
is not properly engaged. Open it
again and close it with a little more
force.
To Next Page
Loading...
