79
5
5
Features of your vehicle Mirrors
System component
1
Icon display area
Displays icons, adjusting Brightness &
Tilt
2
Lever
Operate to change between digital
mirror mode and optical mirror mode.
3
Menu button
Press to display the icon display area
and select the item you want to adjust
(Brightness & Tilt).
4
Select/adjust button
Press to change the setting of the
item you want to adjust.
5
Camera indicator
Indicates that the camera is operating
normally.
6
HomeLink buttons
For the operation of the “HomeLink씾
Universal Transceiver”.
How to change the mode
The mode can be switched when the
switch is in the ON position.
1. Pull the mode select lever to all the
way switch to the Digital Center Mirror
mode (camera view mode).
* Displays an image of the area behind
the vehicle. In this mode, the camera
indicator is shown.
2. Push the mode select lever to all the
way switch to the optical inside rear
-
view mirror mode.
* Turns off the display of the Digital
Center Mirror allows it to be used as
an optical mirror.
Adjusting the mirror height
The height of the rearview mirror can be
adjusted to suit your driving posture.
Change to optical mirror mode, adjust
-
ing the rearview mirror angle by moving
it up and down.
Display settings (Digital mirror
mode)
1. Press the menu button (1) The icons
will be displayed.
Icons Settings
Select to adjust the bright
-
ness of the display.
Select to adjust the display
up/down.
To Next Page
Loading...
