Driving your vehicle
166
Smart regeneration system
Non-operating condition(s)
僅 Smart Cruise Control is operating.
僅 When the charging status of the high
voltage battery is too high
僅 The vehicle is in SNOW mode.
僅 The trailer is attached
僅 When the DBC function is operating
When the vehicle is stopped or parked
by i-Pedal on a steep hills, be sure to
depress the brake pedal.
When the deceleration rate, the vehicle’s
level of deceleration, reaches a certain
level while the i-Pedal function is on,
brake lights may turn on without
depressing the brake pedal.
Smart regeneration system
The Smart Regeneration System con
-
trols the regenerative braking automati
-
cally according to the road grade and
the distance from the vehicle ahead.
The system minimizes unnecessary
operation of the brake and taccelerator
pedal, improving electric efficiency and
assisting the driver.
Setting smart regeneration sys
-
tem
Pull and hold the right-side paddle
shifter for over 1 second to turn on and
off the automatic regenerative braking
regenerative braking.
Smart regeneration system acti
-
vation
When 'AUTO' for the regenerative brak
-
ing level is displayed on the instrument
cluster, the regenerative braking level is
controlled automatically when vehicle
speed is above 10 km/h (6 mph) and one
of the conditions below is met:
僅 The road gradient changes
僅 The distance from the vehicle ahead
reduces or increases.
僅 The speed of the vehicle ahead
reduces or increases.
僅 The regenerative braking level can be
adjusted based on the driver's decel
-
eration style. (
Strong
/
Medium
/
Gen
-
tle
)
To adjust the level, select
Setup
→
Vehicle
→
ECO Vehicle
→
Smart
Regeneration System
in the infotain
-
ment system.
To Next Page
Loading...
