Kia EV9 2024 - Active Sound Design; Vehicle Auto Shut off Function

49
6
6
Driving your vehicle Active Sound Design
Active Sound Design (if
equipped)
Active Sound Design is a feature that
makes virtual engine sounds when you
press the accelerator pedal when driv
-
ing. You can adjust the volume.
To operate
僅 Select Settings → Vehicle → Active
sound design
in the infotainment sys
-
tem screen.
僅 Any unauthorized replacement of the
vehicle’s speaker and amplifier may
cause Active Sound Design to mal
-
function.
NOTICE
The infotainment system may change
after software updates. For more infor
-
mation, refer to the web manual pro
-
vided in the infotainment system and
the quick reference guide.
Vehicle auto shut off function
If you fail to turn off the vehicle for too
long, it automatically turns off to prevent
wastinge electric power.
1:
Vehicle will be turned off automati
-
cally in:
2: Reset
Operating conditions
Vehicle Auto -Shut Off timer will not acti
-
vates under any of the following condi
-
tions:
- Vehicle is not in EV READY state
(Only Ignition On) or the Utility
Mode is on
- Gear shift other than in P (Park)
- The brakes pedal is depressed.
-Fastened driver's and passenger's
seat belts are fastened.
- Passenger's seat is occupied.
- The vehicle moves (vehicle speed is
above 3 km/h (2 mph)
- When Auto -Shut Off timer has 10
minutes remaining, the user set
-
ting mode display in the instrument
cluster. If you push the 'OK' button,
auto-Shut off timer resets.
僅 Head unit is not updating
僅 Outside of vehicle charging connector
engaged or exterior V2L used.
僅If you want to deactivate auto-shut off
function during interior V2L, use the
Utility Mode
OMV043049N