Electric vehicle guide
301
Charging electric vehicle
How to connect portable charger
(ICCB: In-Cable Control Box)
1. Connect the plug to a household elec
-
tric outlet.
2. Check if the power lamp (green)
appears on the control box.
3. Depress the brake pedal and apply
the parking brake.
4. Turn OFF all switches, shift to P
(Park), and turn OFF the vehicle. If
charging is initiated without the gear
in P (Park), the charging will start after
the gear is automatically shifted to P
(Park).
5. Open the charging door.
For more details, refer to "Charging
door" on page 1-22.
6. Open the protection caps of the
charging connector and the charging
plug. Check if there are any foreign
substances or dust.
7. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire.
8. Charging starts automatically
(charging lamp appears).
9. Check if the charging indicator light
( ) of the high voltage battery in the
instrument cluster is turned ON.
Charging is not active when the
charging indicator light ( ) is OFF. If
the charging connector is not con
-
nected properly, reconnect the
charging cable to charge it again.
10.After charging has started, the esti
-
mated charging time is displayed on
the instrument cluster for about 1
minute.
1: Remaining Time
If you open the driver seat door while
charging, the estimated charging time
is also displayed on the instrument
cluster for about 1 minute. When
scheduled charging or scheduled air
conditioner/heater is set, the esti
-
mated charging time is displayed as "-
-".
To Next Page
Loading...
