33
7
7
Driver assistance guide Blind-Spot Collision-Avoidance Assist (BCA)
the cluster, Blind-Spot Collision-Avoid
-
ance Assist may not operate properly.
Have the function be inspected by a
professional workshop. Visit an autho
-
rized Kia dealer.
僅 If the detecting sensors have been
replaced or repaired, have the vehicle
inspected by a professional workshop.
Visit an authorized Kia dealer.
僅 The genuine Kia rear bumpers which
the Rear corner radar sensors are
mounted are parts with quality and
performance ensured. If arbitrarily
applying paint on or changing the
bumper, the Blind-Spot Collision-
Avoidance Assist may not function
properly. Use only Kia Genuine Parts
or those of an equivalent standard
with proven quality and performance
to repair or replace the bumper.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear cor
-
ner radar.
僅 Blind-Spot Collision-Avoidance Assist
may not work properly if the bumper
has been replaced, or the surround
-
ings of the rear corner radar has been
damaged or paint has been applied.
僅 If a trailer, carrier, etc., is installed, it
may adversely affect the performance
of the rear corner radar or Blind-Spot
Collision-Avoidance Assist may not
operate.
Blind-Spot Collision-Avoidance
Assist settings
Blind-Spot Safety
1 Driver Assistance
2 Driving Safety
3 Blind-Spot Safety
With the vehicle on, select
Setup
→
Vehicle
→
Driver Assistance
→
Blind-
Spot Safety
on the infotainment system.
僅
Blind-Spot Safety
: Blind-Spot Colli
-
sion-Avoidance Assist will warn and
braking assist will be applied depend
-
ing on the collision risk levels.
1 Blind-Spot Safety System is Off
When activating Blind-Spot Collision-
Avoidance Assist or restarting the vehi
-
cle with this function activated, the
warning light on the side mirrors will
appear for approximately 3 seconds.
When the vehicle is restarted with Blind-
Spot Collision-Avoidance Assist inacti
-
vated, the warning message will appear
on the cluster.
To Next Page
Loading...
