35
1
1
Electric vehicle guide Driving electric vehicle
Driving electric vehicle
Starting the vehicle
1. Holding the smart key or registered
digital key 2, sit in the driver's seat.
2. Fasten the seat belt before starting
the vehicle.
3. Make sure to engage the parking
brake.
4. Check the position of the accelerator
pedal and the brake pedal and the
clearance with your right foot.
5. Make sure to depress and hold the
brake pedal.
6. Whilst depressing the brake pedal,
shift to P (Park).
7. Depress and hold the brake pedal
whilst pressing the EV button.
8. When the READY indicator is ON, you
can drive the vehicle. When the
READY indicator is OFF, you cannot
drive the vehicle. Restart the vehicle.
Vehicle ON to READY (green)
9. Depress and hold the brake pedal and
shift to the desired position
10.Release the parking brake and slowly
release the brake pedal. Check if the
vehicle slowly moves forward, then
depress the accelerator pedal.
While the charging cable is connected,
the gear cannot be shift from P (Park) to
any other gear for safety reasons.
Stopping the vehicle
1. Hold down the brake pedal whilst the
vehicle is parked.
2. Shift to P (Park).
3. Engage the parking brake.
4. Press the EV button and turn off the
vehicle.
5. Check if the READY indicator is turned
OFF in the instrument cluster. When
the READY indicator in ON and the
gear is in a position other than P
(Park), the driver can accidentally
depress the accelerator pedal, caus
-
ing the vehicle to move unexpectedly.
Vehicle OFF
Distance to empty
Impact on distance to empty
The distance to empty is displayed dif
-
ferently according to the selected drive
mode in the drive mode integrated con
-
trol system.
For more information, refer to
僅 Driving range depends on the driving
style, electrical load usage, environ
-
ment, and high voltage battery
To Next Page
Loading...
