Driver assistance guide
1007
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
For more details on the precautions of
the rear corner radar, refer to "Blind-
Spot Collision-Avoidance Assist (BCA)"
on page 7-32.
Rear Cross-Traffic Collision-
Avoidance Assist settings
Rear Cross-Traffic Safety
1 Driver Assistance
2 Parking Safety
3 Rear Cross-Traffic Safety
With the vehicle on, select
Setup
→
Vehicle
→
Driver Assistance
→
Park
-
ing Safety
→
Rear Cross-Traffic
Safety
on the infotainment system
screen to turn on Rear Cross-Traffic Col
-
lision-Avoidance Assist.
When the vehicle is restarted, Rear
Cross-Traffic Collision-Avoidance Assist
will always turn on. However, if
Rear
Cross-Traffic Safety
is deselected after
the vehicle is restarted, the driver should
always be aware of the surroundings
and drive safely.
When the trailer is connected, Rear
Cross-Traffic Collision-Avoidance Assist
automatically turns off (if equipped). In
this case, you cannot get help from Rear
Cross-Traffic Collision-Avoidance Assist.
Always drive with care.
Warning Methods
1 Driver Assistance
2 Warning Methods
The
Warning Methods
can be set with
the vehicle on. Select
Setup
→
Vehicle
→
Driver Assistance
→
Warning Meth
-
ods
from the settings menu in the info
-
tainment system to change the following
settings
僅
Warning Volume
: Adjusts the volume
of the warning sound.
僅
Haptic Warning
: Activate the steer
-
ing wheel vibration warning.
僅Ensure that
Warning Methods
you
have set may apply to the
Warning
Methods
of other driver assistance
systems.
僅
Warning Methods
will maintain its
last setting even if the vehicle is
restarted.
僅 The setting menu may not be avail
-
able for your vehicle depending on
the vehicle features and specifica
-
tions.
僅 The
Warning Volume
and
Haptic
Warning
cannot be turned off at the
same time. When one of the warning
is turned off the other is activated.
To Next Page
Loading...
