What to do in an emergency
188
If you have a flat tire (with Tire Mobility Kit)
Do not let the compressor run for more
than 10 minutes. Otherwise, the device
may overheat and be damaged.
僅
To reduce the inflation pressure
,
press the valve on the compressor.
Tire Pressure Sensor
When you use the TMK with a sealant
that is not approved by Kia, the tire pres
-
sure sensors may be damaged by that
sealant. Approved sealant on the tire
pressure sensor and wheel should be
removed when you replace the tire and
the tire pressure sensors should be
inspected at an authorized Kia dealer.
Technical data
僅 System voltage: DC 15 V
僅 Working voltage: DC 10~15
僅 Amperage rating: max. 20 A
僅 Suitable temperatures: -22 to 158 °F (-
30 to 70 °C)
僅Max. working pressure: 90 psi (6.2
bar)
僅Size
- Compressor: 5.9 x 5.5 x 2.4 inches
(150 x 140 x 61 mm)
- Sealant bottle: 8.3 x 3.4 ø inches
(209.5 x 85.5 ø mm)
- Compressor weight: 1.85 lbs. (840
g)
- Sealant volume: 48.8 cu. in (800
ml)
* Sealant and spare parts can be
obtained and replaced at an autho
-
rized vehicle or tire dealer. Empty seal
-
ant bottles may be disposed of at
home. Liquid residue from the sealant
should be disposed of by your vehicle
or tire dealer or in accordance with
local waste disposal regulations.
To Next Page
Loading...
