Vehicle safety controls
• When the seats are folded and unfolded, pressing the 3rd row seat fold/unfold
switch once again stops the operation. Press the switch again.
• When the seats are folded, the seats can be unfolded by pressing the 3rd row seat
back angle adjustment switches located on the left and right of the 3rd row side
trim.
• When the seatback folds forward, it can be used as a storage space.
• When loading or unloading a vehicle, put the gearshift in the P (Park) position, apply
the Electronic Parking Brake (EPB), and then turn off the vehicle.
• The infotainment system may change after software updates. For more information,
refer to the manual provided in the infotainment system and the quick reference
guide.
Seatback folding safety feature
• When a certain amount of force is detected when the 3rd row seats are folded or
unfolded, they automatically return or stop working. However, these functions may
not work if the sensed resistance is less than a certain force or if the seat is almost
folded or unfolded. Also, if a strong impact is applied to the seat, the object detec
tion function may operate even if no obstacle is placed.
• If the object detection function operates several times whilst the seat operates once,
folding and unfolding may be repeated continuously and the operation may stop. In
this case, after checking that objects are caught, operate the switch again to check
that there is no problem.
• The angle of the seatback may change when the seat's object detection function is
activated. Press the 3rd row seat fold/unfold switch to operate it once to reset the
seatback angle to the normal angle.
WARNING
• Do not intentionally place any part of your body or object within the operating range
to check the object detection function whilst the third row seat is operating.
• For safety, when folding or unfolding the 3rd row seats, make sure that there are
no body parts or objects around, such as hands or heads, before operating. In addi
tion, to prevent damage to the seat belt, insert it into the storage holder and store
the buckle in the storage area inside the seat before operating it.
• If a child seat is installed on the 3rd row seat, remove it before operation.
• If an object is placed on the 3rd row seat cushion, remove it before operation.
• Raise the seatback of the 2nd row seats to avoid interference with the front seats,
and if necessary, move the 2nd row seats forward before operating.
140
To Next Page
Loading...
