Vehicle controls
Fingerprint authentication system (if equipped)
Fingerprint authentication system allows the driver to have access to personal infor
mation, unlock profile and exit valet mode with a enrolled fingerprint.
Fingerprint authentication system settings
To use the system, the driver’s fingerprint should be enrolled in the driver’s profile.
The drivers can set or delete their fingerprint through the infotainment system. Follow
the following procedure.
Enrolling fingerprint
OMV053101R
1. Turn on the vehicle.
2. Select Settings > User Profile > Driver 1 > Fingerprint Identification > Set/
Delete Fingerprint > Set in the infotainment.
3. Place your finger that you wish to enroll on the fingerprint sensor (A) according to
the instruction.
4. Following the instructions, place several parts of your fingerprint until the scanning
process is complete.
5. Once the scanning process is completed, the message Saving fingerprint…. ap
pears and the fingerprint enrollment process is proceeded.
6. When the fingerprint enrollment process is completed in the vehicle, the status is
displayed on the infotainment system.
TIP
The infotainment system may change after software updates. For more information,
refer to the manual provided in the infotainment system and the quick reference
guide.
236
To Next Page
Loading...
