Opening and closing
Bonnet
Precautions
WARNING
• Open the bonnet after turning off the vehicle on a flat surface, shifting the gear to
the P (Park) position and setting the parking brake.
• Before closing the bonnet, ensure that all obstructions are removed from the bonnet
opening. Closing the bonnet with an obstruction present in the bonnet opening may
result in property damage or severe personal injury.
• Do not leave gloves, rags or any other combustible material in the motor compart
ment. Doing so may cause a heat-induced fire.
• Always double check to be sure that the bonnet is firmly latched before driving
away. If it is not latched, the bonnet could open whilst the vehicle is being driven,
causing total loss of visibility, which might result in an accident.
• Do not move the vehicle with the bonnet raised. The view will be blocked and the
bonnet could fall or be damaged.
Opening/closing the bonnet
OMV053116R_2
Instrument panel button (1)
Operation
1. Press the bonnet unlock button (1) located on the instrument panel twice. After
pressing the button once, you must press it again within about 3 seconds to unlock
the bonnet.
After about 3 seconds, the pressing count is reset, so you have to press the bonnet
to lock it and repeat the previous process.
2. Lift the unlocked bonnet upwards.
3. Lift the bonnet halfway and it will fully open by itself.
4. After lowering the bonnet, push it all the way down and close it.
283
To Next Page
Loading...
