Vehicle controls
CAUTION
• Do not scrape ice off the mirror face; this may damage the surface of the glass. If
ice should restrict the movement of the mirror, do not force the mirror for adjust
ment. To remove ice, use a deicer spray, or a sponge or soft cloth with warm water.
• If the mirror is jammed with ice, do not adjust the mirror by force. Use an approved
spray de-icer (not cooling system antifreeze) to release the frozen mechanism or
move the vehicle to a warm place and allow the ice to melt.
• The mirrors stop moving when they reach the maximum adjusting angles, but the
motor continues to operate whilst the switch is pressed. Do not press the switch
longer than necessary, the motor may be damaged.
• Do not attempt to adjust the outside rear view mirror by hand. Doing so may dam
age the parts.
• The electric type outside rear view mirror operates even though the vehicle is in the
OFF position. However, to prevent unnecessary battery discharge, do not adjust the
mirrors longer than necessary whilst the vehicle is not running.
• In case it is an electric type outside rear view mirror, don't fold it by hand. It could
cause motor failure.
• We recommend following the procedures in an orderly manner to change or initial
ize the auto reversing user settings. If you move to the next step before completing
the previous one, the changed angle may not be changed or initialization may not
work properly.
Overview
Auto reverse function (if equipped)
OMV053030R_2
The outside rear view mirror will move downwards when the vehicle is in R (Reverse)
position to assist reverse parking.
300
To Next Page
Loading...
