Adjusting
Operation
• Turn the rear fog light switch (1) to the dedicated position.
Operating condition(s)
• The headlamps are turned ON.
CAUTION
When in operation, the fog lights consume large amounts of vehicle electrical power.
Only use the fog lights when visibility is poor.
Operating the high-beam headlamps
OMV053132L
Operation
• Push the lever to use high beam or pull the lever to flash the headlights ( ).
WARNING
Do not use high beam when there are other vehicles. Using high beam could obstruct
the other driver's vision.
High Beam Assist (HBA) (if equipped)
OMV053133L
325
To Next Page
Loading...
