Adjusting
NOTE
• Depending on the instrument cluster specification or theme, images or colours may
be displayed differently.
• For more details on the limitations of the front view camera, refer to "Forward Colli
sion-Avoidance Assist (FCA)" on page 496 .
NOTE
• At times, High Beam Assist may not work properly. The function is for your conve
nience only. It is the responsibility of the driver for safe driving practices and always
check the road conditions for your safety.
• When High Beam Assist does not operate normally, change the headlamp position
manually between high beam and low beam.
Traffic change (For Europe)
The distribution of light from low-beam headlamps is asymmetrical. If you go to a
country with opposite traffic direction, this asymmetrical distribution will dazzle dri
vers in oncoming vehicles. To avoid dazzling other drivers, ECE regulations require
various technical solutions (e.g., automatic change system, adhesive sheet, downward
aim). These vehicle's headlamps are designed not to dazzle oncoming drivers. Thus,
you need not change your headlamps when in a country with opposite traffic direc
tion. This headlamps are designed to adjust in setting mode in infotainment system.
Select the Travel mode, Settings > Vehicle > Lights > Travel Mode from the infotain
ment system. (if equipped).
Interior lights
Precautions
NOTE
• The DOOR mode and ROOM mode can not be selected at a time.
• To prevent unnecessary charging system drain, close the vanity mirror cover after
using the mirror.
• To prevent unnecessary charging system drain, close the glove box securely after
using the glove box.
• To prevent the 12V battery from being discharged, do not leave the interior light on
for a prolonged time whilst the vehicle is not running.
329
To Next Page
Loading...
