Adjusting
Air flow
Mode Operation
Front seats Rear seats (2nd/3rd)
Air flow is directed towards the face,
floor and the windscreen with small
amount directed to the side-window
defrosters
1, 2 , 3 , 4 , 5 6 , 7
Most of the air flow is directed to
the floor, with a small amount of
air directed to the windscreen,
side-window defrosters, and side air
vents.
1 , 3 , 4 , 5 6
Most of the air flow is directed to
the floor and the windscreen, with
a small amount directed to the
side-window defrosters and side air
vents.
1 , 3 , 4 , 5
-
Most of the air flow is directed to
the windscreen, with a small amount
of air directed to the side-window
defrosters and side air vents.
1 , 4
-
Operation
1. Start the vehicle.
2. Set the mode-selection buttons as desired. To improve the effectiveness of heating
and cooling:
• Heating: ( )
• Cooling: ( )
3. Set the temperature control to the desired temperature level.
4. Set the air intake control to the position for outside (fresh) air if required.
5. Set the position of the fan speed control so that it runs at the desired speed.
6. If desired, turn the air conditioning ON with the temperature set high in order to
dehumidify the air before it enters into the cabin.
If the windscreen fogs up, select the Front Defrost ( ) mode.
343
To Next Page
Loading...
