Vehicle driving controls
• Brake disc cleaning may decrease the driving distance by restraining the regenera
tive braking system. After brake disc cleaning, the regenerative braking system may
be restored by selecting any other recuperation level other than 0.
• If the regenerative braking system is not restored after the brake disc cleaning, Kia
recommends visiting an authorised Kia dealer/service partner.
Hill-start Assist Control (HAC)
Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the
brakes automatically for approximately 2 seconds (maximum of 5 seconds when the
accelerator pedal is slightly depressed during HAC operation).
The brakes are released when the accelerator pedal is engaged or after approximate
ly 2 seconds.
WARNING
HAC does not replace the need to apply brakes whilst stopped on an incline. Whilst
stopped, make sure you maintain brake pressure sufficient to prevent your vehicle
from rolling backward and causing an accident. Don't release the brake pedal until
you are ready to accelerate forward.
Crosswind Stability Control (CSC) (if equipped)
Crosswind Stability Control (CSC) works with Electronic Stability Control (ESC) and
Motor Driven Power Steering (MDPS) to stabilize the vehicle when it is being shaken,
or loses traction due to strong crosswind.
CSC system operation
OMV063039L
1 Crosswind stability control activated
462
To Next Page
Loading...
