Driver assistance guide
CAUTION
• The detecting range may vary depending on the speed of your vehicle. Even if there
is a vehicle in the blind spot area, Blind-Spot Collision-Avoidance Assist may not
warn you when you pass by at high speeds.
• Warning timing may vary depending on the speed of the vehicle approaching at
high speed.
Detecting sensor
CAUTION
• Never disassemble the detecting sensor assembly, or cause any damage to it.
• If the detecting sensor or near the sensor has been damaged or impacted in any
way, even though the warning message does not appear on the cluster, Blind-Spot
Collision-Avoidance Assist may not operate properly. Have the function be inspect
ed by a professional workshop. Kia recommends that you visit an authorised Kia
dealer/service partner.
• If the detecting sensors have been replaced or repaired, have the vehicle inspected
by a professional workshop. Kia recommends that you visit an authorised Kia deal
er/service partner.
• The genuine Kia rear bumpers which the Rear corner radar sensors are mounted
are parts with quality and performance ensured. If arbitrarily applying paint on or
changing the bumper, the Blind-Spot Collision-Avoidance Assist may not function
properly. Use only Kia Genuine Parts or those of an equivalent standard with proven
quality and performance to repair or replace the bumper.
• Do not apply license plate frame or objects, such as a bumper sticker, film or a
bumper guard near the rear corner radar.
• Blind-Spot Collision-Avoidance Assist may not work properly if the bumper has
been replaced, or the surroundings of the rear corner radar has been damaged or
paint has been applied.
• If a trailer, carrier, etc., is installed, it may adversely affect the performance of the
rear corner radar or Blind-Spot Collision-Avoidance Assist may not operate.
530
To Next Page
Loading...
