Blind-Spot Collision-Avoidance Assist (BCA) (if equipped)
NOTE
• Ensure that Warning methods you have set may apply to the Warning methods of
other driver assistance systems.
• Warning methods will maintain its last setting even if the vehicle is restarted.
• The setting menu may not be available for your vehicle depending on the vehicle
features and specifications.
• With the warning volume is 0, if you deselect Haptic warning , the warning volume
will be automatically adjusted with volume 2.
• With the Haptic warning is deselected, if you adjust the warning volume to 0, the
Haptic warning will be automatically selected.
Blind-Spot Collision-Avoidance Assist operation
Blind-Spot Collision-Avoidance Assist will warn and control as following operation.
• Collision warning
• Collision-avoidance assist (whilst departing)
Collision warning
OMV073249R_4
The warning light on the outside rear view mirror (side view mirror) and head-up dis
play (if equipped) will appear when the vehicle on both lanes is detected from the
rear.
A vehicle is detected in the following conditions.
• Your driving speed: Above 20 km/h (12 mph)
• The speed of the vehicle in your blind spot area: Above 10 km/h (7 mph)
With the vehicle detection state, Collision warning will alert the driver when the turn
signal is activated to make a lane change with an adjacent car in the blind spot area.
533
To Next Page
Loading...
