Safe Exit Warning (SEW) (if equipped)
Safe Exit Warning operation
NOTE
• The following warning message will appear on the LCD display.
For more details, refer to the warning and control section of the function.
◦ Watch for traffic
Warning and control
Safe Exit Warning warns the following actions.
• Collision warning when exiting vehicle
Collision warning when exiting vehicle
The warning light on the side view mirror will blink and the warning message will ap
pear on the cluster, and an audible warning will sound.
Warning message: Watch for traffic
• Safe Exit Warning will warn under the following circumstances:
◦ Your driving speed: below 3 km/h (2 mph)
◦ The speed of the approaching vehicle from the rear: above 6 km/h (4 mph)
WARNING
• For your safety, change the Settings after parking the vehicle at a safe location.
• If any other function's warning message is displayed or audible warning is generat
ed, Safe Exit Warning message may not be displayed and audible warning may not
be generated.
• You may not hear the warning sound of Safe Exit Warning if the surrounding is
noisy.
• Safe Exit Warning does not operate in all situations or cannot prevent all collisions.
• Safe Exit Warning may warn the driver late or may not warn the driver depending
on the vehicle and driving conditions. Always check vehicle surroundings.
• The driver and passengers are responsible for accidents that occur whilst exiting the
vehicle. Always check the surroundings before you exit the vehicle.
NOTE
• After the vehicle is turned off, Safe Exit Warning operates for approximately 3 min
utes, but turns off immediately if the doors are locked.
• Images or colours may be displayed differently depending on the instrument cluster
specifications or theme.
543
To Next Page
Loading...
