Driver Attention Warning (DAW) (if equipped)
Driver Attention Warning operation
Inattentive Driving Warning function
The basic function of Driver Attention Warning is as follows.
• Taking a break
Taking a break
The inattentive warning light ( ) blinking and warning message will appear on the
cluster and an audible warning will sound to suggest that the driver take a break,
when the driver's attention level is below a certain level.
Warning message: Consider taking a break
• Driver Attention Warning will not suggest a break when the total driving time is
shorter than 4 minutes or 4 minutes has not passed after the last break was sug
gested.
Driver Attention Warning operates under the following conditions:
• Your driving speed: Approximately 0~210 km/h (0~130 mph).
WARNING
For your safety, change the Settings after parking the vehicle at a safe location.
CAUTION
• Driver Attention Warning may suggest a break depending on the driver's driving
pattern or habits, even if the driver doesn't feel fatigue.
• Driver Attention Warning is a supplemental function and may not be able to deter
mine whether the driver is inattentive.
• The driver who feels fatigued should take a break at a safe location, even though
there is no break suggestion by Driver Attention Warning.
Leading Vehicle Departure Alert function
Warning message: Leading vehicle is driving on
When a detected vehicle in front departs from a stop, Leading Vehicle Departure Alert
will inform the driver by displaying the warning message on the cluster and an audi
ble warning will sound.
WARNING
• If any other function's warning message is displayed or audible warning is generat
ed, Leading Vehicle Departure Alert's warning message may not be displayed and
audible warning may not be generated.
• The driver should hold the responsibility to safely drive and control the vehicle.
565
To Next Page
Loading...
