Blind-Spot View Monitor (BVM) (if equipped)
Blind-Spot View Monitor operation
Turn signal lever
OMV073100L
Blind-Spot View Monitor will turn on and off
when the turn signal is turned on and off.
Blind-Spot View Monitor
Operating conditions
• When the left or right turn signal turns on, the image on the instrument cluster will
turn on.
Off conditions
Blind-Spot View Monitor will turn off when one of the following conditions are satis
fied:
• When the turn signal is turned off.
• When the hazard warning flasher is on.
• When other important warning is displayed on the instrument cluster.
Blind-Spot View Monitor malfunction
When Blind-Spot View Monitor is not working properly, or the cluster display flickers,
or the camera image does not display normally, have Blind-Spot View Monitor be in
spected by a professional workshop. Kia recommends visiting an authorised Kia deal
er/service partner.
WARNING
• Blind-Spot View Monitor may display objects at a different distance from what is
shown on the screen due to the correction of the wide-side view camera images.
Make sure to directly check the vehicle's surroundings for safety.
• If the camera lens is covered with foreign material, Blind-Spot View Monitor may not
operate normally.
577
To Next Page
Loading...
